Miumaeov 80cc Bicycle Engine Kit, 2-Stroke Motorized Bicycle Kit Fit for Bikes, Bicycle Motor Engine Kit with Wired Digital Computer

Description

 Buy Now From Walmart
  

WalmartPrice: 129.9$

Specification Model: PK80 Material: Aluminum Displacement: 80cc/0.02gal Number of Cylinders: 2 Torque: 47nm/1.85e-6in Engine Type: Double-cylinder, Air-cooled, Two-stroke Starting Method: Foot Pedal Starting Ignition Mode: CDI Ignition Number of Teeth of Chain Wheel: 44 Teeth Applicable Bicycle Size: ≥26in Number of Chain Teeth: 110 Spokes: 36 Fuel Type: 90#Gas The Mixing Ratio of Gas and Oil: 16:1 Black Teardrop Gas Tank Volume：2.5L/0.66GAL Speed: 20-25km/h(65.62-82.02ft/h) (on a smooth road) Fuel Consumption: 2-2.5L/100KM(0.528-0.66GAL/100KM) Engine Speed: 2700rpm Power: 3.5kw Package Size: 42*42*18cm/16.54*16.54*7.09in Gross Weight: 11.4kg/25.13lbs Net Weight: 11kg/24.25lbs Installation 1. Attach the sprocket assembly to the rear wheel of the bike. All parts are installed on the side without the original bike chain. Please keep the original bike chain and do not make any changes. Install the clamping rubber on the rear wheel axle first (no cut), then on the sprocket, keeping the concave side of the sprocket tight against the outside of the clamping rubber. Install the other outer clamping rubber (with cut) on the rear axle (inside of the steel wheel spokes). Keep both rubbers tightly clamped to each side of the steel spokes. Then attach the large and small cleats tightly to the cleats (inside of the steel wheel spokes) and screw the sprocket assembly tightly to the rear wheel. Please take care to keep the pulsation between the radial and axial lines of the sprocket and the rear axle no more than 1 mm. 2. Secure the motor to the bike frame. Align the crankcase circle with the bike frame and secure it. The centerline of the cylinder is usually tilted forward about 20 degrees. 3. Fix the chain and adjust the slackness with the idler wheel. 4. Fix the protective case. 5. Fix the vent pipe. 6. Fix the gas pedal control on the right side of the bike. Fix the clutch control on the left-hand side of the bike. 7. Fix the fuel tank on the cross member of the bike and connect the fuel pipe to the carburetor inlet. Connect Wires 1. Blue wire and blue wire connection. 2. Black wire and black wire connection. 3. White wire does not need to be connected. Package Include 80cc 2-Stroke Engine ×1 CDI×1 NT carburetor x1 Chrome Muffler ×1 Clutch Cable ×1 Drive Chain idler Pulley ×1 415 Bike Engine Drive Chain ×1 Drive Chain Guard ×1 2-Stroke Spark Plug ×1 Locking Alloy Clutch Lever ×1 Twist Throttle and Cable With Grip ×1 Throttle Cables ×2 0.66GAL Black Teardrop Gas Tank ×1 Fuel Line ×1 Fuel filter ×1 Gasoline Tank Switch ×1 Sprocket Clamp Assembly ×1 44 Tooth Chrome Drive Sprocket ×1 Large Spring ( Heat Shield Spring )×1 Extension Spring ( Recoil Spring )×1 Bicycle Wired Computer×1 Shock Absorbing Pads× 2 English Manual×1 All Accessories for Assembly Note 1. The white wire of the magnetic coil does not need to be connected and only needs to be wrapped with electrical tape to insulate. 2. The rider needs basic hardware skills, tools, and around 2-3 hours for installation and fine-tuning adjustments. If you do not have experience or the first time installing the motor kit, please kindly read our instructions and search “80cc bicycle engine kit” on the Internet. 3. There should be 26″ and more clearance between the bottom bracket and top bar of the frame.

【High-speed Riding】 This bicycle motor engine kit reaches 2700rpm. Installing it with your bike will allow your bike to achieve a riding speed of 20-25km/h(65.62-82.02ft/h), making you feel the excitement of high-speed riding. 【High-quality Material】 Our bicycle motor engine kit is made of heavy-duty aluminum, which works with low noise and low vibration. It has strong strength and hard endurance, which can provide you with long service life. 【Less Fuel Consumption】 The gas tank and fuel-saving two-cylinder gasoline engine make your bike ride only consume 2-2.5L/100KM of fuel for a hundred kilometers. Therefore, it allows your bike to have better endurance and support long-distance riding. 【Large Capacity Gas Tank】 It comes with a 0.66GAL black teardrop gas tank, so it can hold more oil at once and reduce the trouble of frequent refueling. 【Safe Ignition】 CDI ignition method is safer and more stable in use. Therefore, when the bicycle engine rotates at high speed, this ignition method will not cause the contact points to wear out, thus ensuring high performance and durability. 【High-Performance Carburetor】 The new carburetor is designed to effectively improve airflow and efficiency with a larger vent, breather tube, and the popular low-profile cone air filter. This also provides complete tuning control for less hassle during use! 【Complete Accessories】 The package is equipped with all the accessories needed for installation and use, so you don’t need to make additional purchases, which is more convenient and affordable. 【LCD Bike Wired Computer】 This bicycle motor engine kit comes with a LCD bike wired computer, you can record your riding data such as speed comparison, average, max, riding time, and riding distance to make your riding more convenient and safe. 【CDI Ignition Coil Kit】 It comes with a thin center electrode plus a sharp ground electrode for better operation. It also comes with a spark plug for strong fire and good performance.